End-Grain Cutting Board — Four Hardwoods | Diamond Lattice | Handmade

€350

Sale Sold out

Taxes included.

(Optional) Personalization Info:

0/1000

Four Hardwoods. One Board. Zero Compromises.

This is the cutting board that outlasts trends, kitchen renovations, and probably a few homes.

This end-grain cutting board combines the deep violet of purpleheart, the ivory warmth of hard maple, the pale golden grain of ash, and the rich reddish-brown of sapele into a striking diamond lattice pattern that's almost too beautiful to use — almost.

At 500 × 310 × 40 mm, this is a large, serious board built for cooks who take both their craft and their kitchen seriously. The generous surface handles everything from whole roasts to full charcuterie spreads, while the rounded corners and carved finger-grip cutouts make it effortless to move from counter to table and back.

💎 The Diamond Lattice — Precision in Wood

The diamond lattice isn't printed, painted, or veneered. It's built block by block — every piece individually cut at precise angles and glued by hand to maintain perfect alignment across the entire surface. The optical effect of the lattice depends on absolute precision: the slightest mistake at any stage breaks the pattern.

This is what makes a board this complex rare even among handmade pieces — and it's why no two boards are ever identical.

🌳 Four Hardwoods. One Surface.

🟣 Purpleheart — deep violet-brown, one of the hardest hardwoods on earth, with a colour that only deepens with age
🍁 Hard Maple — bright natural ivory, the gold standard of cutting board woods
🌾 European Ash — pale golden tone with an open, expressive grain
🌿 Sapele — rich reddish-brown with shimmering ribbon-figure lustre

No stains. No dyes. Every tone is the wood itself.

🔪 End-Grain Construction — The Gold Standard

End-grain construction is the gold standard of cutting boards — and for good reason.

When a knife meets the surface, the blade slides between the wood fibres rather than cutting across them, meaning the board literally closes back up after each use. The result? Fewer visible scratches over time, a kinder edge on your best knives, and a board that only grows more characterful with age.

👐 Carved Finger-Grip Cutouts

A board this size needs to move around — between counter and table, sink and stove, prep area and serving station. Carved finger-grip cutouts on the underside make lifting the 4+ kg board effortless, even with one hand. A small detail that makes a real difference in daily use.

📐 Materials & Finish

🪵 Woods: Purpleheart · Hard Maple · European Ash · Sapele
📐 Dimensions: 500 × 310 × 40 mm / 19.7″ × 12.2″ × 1.57″
⚖️ Weight: approx. 4.5–5.2 kg
🔲 Pattern: Geometric diamond lattice
👐 Details: Rounded corners, integrated finger-grip cutouts
✋ Hand-sanded through progressive grits to a silky-smooth finish
🫒 Finished with food-safe mineral oil & beeswax blend — ready to use straight from the box

✍️ Personalisation — Laser Engraved

Make it truly one of a kind. Add a laser-engraved name, monogram, date, or short message to the side or underside of the board.

👉 Add engraving at checkout — +$20

Perfect for: Wedding · Engagement · Housewarming · Milestone Birthday · Christmas · Father's Day · Mother's Day

🎁 The Gift That Says "I Thought About You"

Few gifts say I thought about you quite like a handmade end-grain board of this calibre. Whether it's a wedding registry upgrade, a housewarming centrepiece, a chef's birthday, or a Christmas gift for the person who has everything — this board arrives ships ready to give, wrapped and presented beautifully. No wrapping required on your end.

🇵🇱 Handmade in Poland

This board is handcrafted in our small workshop in Poland, where every piece is built by hand — no shortcuts, no mass production. We take pride in the precision of every joint, the balance of every colour, and the weight of every finished board leaving our bench.

Custom sizes and wood combinations are available on request — just send us a message.

Built by Hands. Used for Life.

Specifications

Dimensions 500 × 310 × 40 mm / 19.7″ × 12.2″ × 1.57″
Weight ≈ 4.5–5.2 kg / 9.9–11.5 lbs
Wood Species Purpleheart · Hard Maple · European Ash · Sapele
Construction End-grain, geometric diamond lattice pattern
Lifting Detail Carved finger-grip cutouts on underside
Surface Finish Hand-sanded through progressive grits, silky-smooth & splinter-free
Treatment Food-safe mineral oil & beeswax blend — safe for all food contact
Edges Fully rounded, comfortable to hold
Personalisation Laser engraving available — FREE
Origin Handmade in Poland 🇵🇱

Care Instructions

A board this beautiful deserves a little love in return — and it's easy. Your board arrives pre-oiled, pre-waxed, and ready to use. Treat it well and it will last a lifetime.

✅ Do

Wash by hand — warm water and a small amount of mild soap
Dry immediately — stand upright or lay flat on a rack; never leave flat on a wet surface
Re-oil every 1–2 months — apply food-grade mineral oil generously to keep the wood nourished and the colours vivid
Re-wax occasionally — a thin coat of beeswax every few months keeps the surface sealed and the four-wood contrast rich
Revive if needed — if the surface ever feels rough, a light sand with 220-grit paper followed by oiling restores it completely

❌ Don't

No dishwasher — ever. Heat and prolonged moisture will crack and warp the board irreversibly
No soaking — never submerge or leave standing in water
No prolonged heat or sunlight — extended exposure can fade the purpleheart's deep violet and the sapele's reddish-brown tones

💡 Purpleheart and sapele both deepen in colour with age and regular oiling — a natural transformation that makes your board more beautiful every year.

Shipping & Returns

📦 Shipping

All boards are handmade to order in our Polish workshop
Standard orders: dispatched within 3–5 business days
Personalised / engraved orders: dispatched within 4–6 business days
Tracked shipping available at checkout
We ship across Europe and internationally — rates calculated at checkout
Note: At nearly 5 kg and 50 cm in length, this is one of our largest boards — shipping costs reflect the real weight and dimensions

↩️ Returns

We want you to love your board. If something isn't right, contact us within 14 days of delivery
Boards must be unused and in original condition for a standard return
Personalised boards are non-refundable unless damaged or defective — please double-check your engraving text before ordering
Damaged in transit? Send us a photo within 48 hours and we'll make it right — no back-and-forth, no hassle

📩 Questions about your order? Message us directly — we respond within one business day.

FAQ

Is the board ready to use straight out of the box?

Yes. Every board is finished with multiple hand-applied coats of food-safe mineral oil and beeswax before it ships. No prep needed — unbox, admire, and start cooking.

How is the diamond lattice pattern made?

Each block is individually cut at precise angles and glued by hand in our Polish workshop. The diamond lattice is built piece by piece from four separate hardwoods — not printed, stamped, or veneered. The pattern goes all the way through the board, which is why no two boards are ever exactly identical.

How do the finger-grip cutouts work?

Carved cutouts on the underside of the board provide secure handholds, making it easy to lift, carry, and reposition the board even with one hand. At 4.5+ kg, this design detail makes a real difference in daily use — particularly when moving the board between counter, sink, and table.

Will the colours change over time?

Yes, and beautifully. Purpleheart deepens into a richer burgundy-violet with age and oiling. Sapele takes on a richer reddish-brown. Ash develops a warm golden patina. Maple takes on subtle honey tones. The four-wood contrast remains striking throughout the board's lifetime — many owners say their board becomes more beautiful every year.

Can I cut raw meat on it?

Absolutely. End-grain boards are the preferred surface for all types of food prep including meat — easy to sanitise, naturally hygienic, and built to handle heavy use. Wash with warm soapy water and dry immediately after.

Why end-grain instead of face-grain or edge-grain?

End-grain construction means the knife enters between wood fibres rather than cutting across them. The fibres close back up after each cut — the surface self-heals, your knives stay sharper for longer, and the board improves visually with age rather than deteriorating. It's the gold standard of cutting board construction.

Is 50 cm too large for daily use?

Not at all — it's intentionally generous. The size handles whole roasts, full charcuterie spreads, and large bread loaves without crowding. For most cooks who use the board daily, the size becomes a feature within a week. The finger-grip cutouts make it easy to move and store despite the dimensions.

Can I get a custom size or different wood combination?

Yes. We welcome custom orders — different dimensions, alternative wood species, or bulk orders for weddings and corporate events. Send us a message through the store and we'll respond within one business day.

How do I care for the engraving?

The laser engraving is deep and permanent — it won't fade with oiling or normal use. Treat the engraved area exactly the same as the rest of the board.